Case Studies

Our case studies are designed to

offer you valuble information about

our pioneering cleaning systems.

For more information please

do not hesitate to contact us.

EXTERIOR FACADE CLEANING - Render and Brick

Spectrum was approached by a long-term client to clean the facade of one of their residential buildings. The management company asked Spectrum to remove built up dirt and grime from the surface of the building and return the property to its former aesthetic condition.

Revitalising Prestigious Buildings With Steam Cleaning In 1 Week

The Project

EXTERIOR FACADE CLEANING

Render and Brick

  • Location:London
  • Client:Building Management Company
  • Project Duration:1 Week
  • Subtrate:Render and Brick
  • Access Method:Rope Access and 3D Printed Equipment

The Site

The Abbey Street site was made up of a large residential block. The block had not been cleaned for a number of years, something that had resulted in a significant accumulation of dirt and grime.

The Logistics

The main challenge at the Abbey Street block was restricted access. This limited the ability of heavy machinery to reach certain parts of the site and meant that specialist access techniques were required in order to complete the clean.

Spectrum uses a range of access techniques to reach high and awkwardly-located parts of a building. These include operatives working via rope access and using our own bespoke, patented equipment. A lot of this equipment is designed and 3D printed in-house. This tailored approach allows our teams to reach areas of a building that would be inaccessible using other, less innovative methods.

As access was a big issue on this project, our specialist skills were required in order to complete the job. Our teams were able to utilise these techniques to minimise disruption to residents and make the work at the Abbey Street site as quick and efficient as possible.

Our operatives were required to use a range of cleaning methods in order to remove grime from multiple surfaces and prevent damage to the substrate. Around 80% of the facade was made of brick, the rest of the structure was a combination of stone and painted cement-based render.

+plus point

A combination of specialist cleaning systems all used without the need for scaffolding.

EXTERIOR FACADE CLEANING
Case Study

Restorative Steam Cleaning

Because of the level of staining on the facade of the Abbey Street site, our teams needed to clean surfaces multiple times in order to remove the built up dirt and grime. In some cases, materials had to be cleaned three times before they were returned to their original aesthetic condition. 

As different materials require different cleaning methods, it is essential that operatives have an in-depth understanding of building materials and cleaning techniques. If incorrect chemicals or processes are used, it can damage the substrate and impact the result of the clean.

In order to fully remove the staining, dirt and grime from the façade at Abbey Street, our operatives used a combination of cleaning methods. For the painted, rendered facade, we used our patented 4-stage cleaning process. Known as P.A.S.T., this process involves a number of steps designed to achieve outstanding results and maximise efficiency.

First, our teams carefully prepare the render for cleaning. They then apply a biocide treatment to the surface of the building. This treatment is specially formulated to kill algae, mould and other organic matter commonly found on the exterior of buildings. If left untreated, this organic matter can quickly grow to cover large areas of a façade, discolouring it in the process.

Following the application of the biocide, our teams used super-heated steam to remove dirt, grime and staining. Heated to a temperature of 150 degrees, this steam quickly and efficiently removes organic matter, staining and discolouration from rendered buildings. If any staining remains on the surface of the building following the steam clean, our teams will use a targeted treatment to permanently remove them.

For stone and brick areas, our teams selected the DOFF cleaning process. This innovative process also uses super-heated steam to remove dirt and grime. Unlike other cleaning methods, the steam used is not highly pressurised and so will not cause damage to the substrate during the clean. This is very important when cleaning brick and stone, as high-pressure water jetting can cause significant damage and a patchy, uneven result.

When using both of these cleaning methods, our teams utilised the unique, patented equipment available to them. On this project, our operatives used modular tubes to allow them to clean the property from the safety of the ground. This approach meant that heavy machinery was not needed and that the work could be carried out quickly and efficiently.

Operatives repeated the cleaning processes multiple times until all traces of dirt, grime and staining had been removed from the property. As they were able to work from the ground, this repeated cleaning could be done quickly and treatments effectively applied to any areas that required extra attention.

This innovative, flexible approach was beneficial for both the client and the residents of the Abbey Street block. Cleaning the building quickly minimised disruption to those living in the building. The work was completed in just one week, allowing life in the property to get back to normal as quickly as possible.

Cleaning the façade from the ground saved the client a considerable amount on heavy machinery and scaffolding hire. If scaffolding had been used, the project could have taken up to twice as long to complete, something that would have caused more disruption to tenants and made the clean more costly. Our approach made the project cost effective as well as time efficient.

+plus point
Usine DOFF steam cleaning, we were able to remove all of the dirt and grime without harming the subtrate

Client Satisfaction Ensured

The clean at the Abbey Street site was completed on time and on budget. In just one week, our teams were able to remove years of built up dirt and grime and return the facade of the property to its original aesthetic condition. Disruption was kept to a minimum throughout the project and work was carried out quickly and efficiently. 

The client was very pleased with the work carried out, as it delayed the need for redecoration and returned the façade of the property to its original aesthetic condition. Bringing the project in within the designated timeframe, and keeping costs to a minimum, also helped to ensure client satisfaction.

Back to Case Studies

Read Our Case Studies

Scaffold-Free Render Cleaning - No Painting Required

18th June 2020

+plus pointAll rust and lead staining was removed with out PAST process.

Rope Access Render Cleaning In Clapham 600 Man Hours And A Clean Facade Later!

18th June 2020

+plus point20% cleaned with custom 3D printed cleaning equipment.

How We Cleaned 100 Rendered Elevations In Just Two Months!

18th June 2020

+plus pointWe saved our client thousands of pounds in access costs.

8 Block of Flats Restored With No Scaffolding Required!

18th June 2020

+plus pointPortable anchors made it possible to abseil this site.

10 Weeks To Clean The Roofs On 6 Blocks Of Flats In London

18th June 2020

+plus pointProject duration was reduced by 50% due to our patented cleaning system.

EXTERIOR FACADE CLEANING

18th June 2020

+plus pointA combination of specialist cleaning systems all used without the need for scaffolding.

When 3 Companies Couldn't Find An Access Solution We Knew We Had To Solve It!

18th June 2020

+plus pointOur patented cleaning equipment made this possible.

Would A Conversation Make It Easier For You?

Call Us On:

020 3551 6206

Email Us On:

info@spectrums.co.uk

We Cover The WHOLE Of The UK!